Skip to content
WorksteadJournal

Considered choices.
Better places to work.

Supplies & Storage

Setting Reorder Points for Everyday Office Supplies

Set a practical ordering trigger from actual consumption, replenishment time, stock checks, and the consequences of running out. Includes a worked planning example.

A supply shelf with two orderly rows of paper reams and a visible empty reorder space, blank shelf tags
AI-generated editorial illustration.

A reorder point tells you when to place a supply order. It does not tell you how much to buy. Keeping these two decisions separate helps a small office avoid both empty shelves and deliveries that cannot fit in the cupboard.

Start with the supplies whose absence actually interrupts your work. For one office that may be shipping labels; for another it may be paper for signed forms. The useful threshold depends on consumption, delivery time, how often someone checks the shelf, and the consequences of a shortage.

Choose a counting unit you can maintain

Use a consistent unit for each item: reams of paper, unopened cartridges, boxes of envelopes, or individual marker packs. Record the supplier’s pack size separately. A carton containing several boxes is not the same unit as a box, and mixing the two can make a stock record look much healthier than it is.

Count usable stock wherever it is kept, including reserve cupboards. Do not count damaged items or supplies reserved for a confirmed project as freely available. Note orders already placed so another person does not order the same item again.

Estimate demand and delivery time

Choose a period that includes ordinary work and any recurring busy periods. Purchases alone can misrepresent use: a large delivery may still be on the shelf. Where possible, calculate consumption from opening stock plus receipts minus closing stock, allowing for transfers and damaged units.

Divide consumption by the number of comparable working weeks to obtain an average. Keep a note beside unusual events rather than silently deleting them. A known conference may deserve its own planned order, while a regular reporting deadline belongs in your recurring demand estimate.

Record delivery time from the point an order is ready to be placed until stock is available for use. Internal approval, supplier processing, transport, and receiving can all matter. Recent deliveries offer a starting point, but an average alone does not cover every delay. Note the range and any reasons for unusually slow deliveries.

Calculate a provisional reorder point

A useful starting formula is: reorder point = expected use during replenishment time + chosen buffer. Keep the time units consistent. If usage is per working week and delivery is measured in working days, use your actual working calendar rather than mixing business days and calendar days.

The buffer is a deliberate allowance for uncertainty, not a fixed percentage that fits every office. Consider how variable use is, how late deliveries can be, whether a substitute is available, and what interruption would cost. A low-use item can still be critical if there is no substitute.

Illustrative example: suppose an office uses two reams per working week, delivery normally takes one working week, and the buyer chooses a two-ream buffer. The starting point is (2 × 1) + 2 = four reams. With continuous monitoring, the order would be placed when available stock reaches four reams. The buffer covers another week’s demand only if consumption remains at the assumed rate; it is not a guarantee against shortages.

Include the time between stock checks

A threshold is useful only if someone notices it. If stock is checked periodically, it may pass below the threshold well before the next count. Account for the possible wait until the next review as well as delivery time, or introduce a visible trigger that staff can report immediately.

Using the same hypothetical demand, a possible one-week wait until the next count adds another two reams to the planning requirement. The team could check more often, use a reorder card, or choose a larger allowance. The best option depends on storage and how easily consumption can be observed.

Set order quantity separately

Once the trigger is reached, decide how much to buy based on expected use, usable storage, pack sizes, existing orders, and any manufacturer storage limits. A supplier’s minimum order does not by itself justify raising the trigger. It may instead mean buying a smaller pack elsewhere, combining suitable items in one order, or negotiating a different delivery arrangement.

Situation Decision to consider
A large pack will not fit Compare a smaller pack or staged deliveries before placing the order.
A busy period is confirmed Plan its additional demand explicitly and distinguish it from routine stock.
A replacement is already on order Check its quantity and arrival date before duplicating it.
A substitute is acceptable Record who can approve the substitute and its compatibility.

Make the trigger visible and assign an owner

Put the item name, unit, reorder point, supplier reference, and responsible person in a simple stock list. A shelf label or reorder card can help colleagues report a low level without needing access to a purchasing system. Avoid putting the card behind an item where nobody will see it until the cupboard is empty.

Separate a refill request from an order request. An empty working bin may only need replenishment from reserve stock. The person placing orders should check the total available quantity and outstanding orders, then mark the request as ordered so others can see it is being handled.

Revise the rule when evidence changes

Keep short notes on shortages, emergency purchases, late deliveries, and unused stock. Review the threshold when team attendance, tasks, suppliers, or equipment change. If the shelf regularly fills beyond capacity, examine order quantities as well as the buffer; lowering the trigger alone may not solve overbuying.

  • Use one clear counting unit for each supply.
  • Include review delays and internal approvals in replenishment planning.
  • Choose the buffer from local risks and alternatives.
  • Check reserve stock and incoming orders before buying.
  • Give a named person responsibility for acting on the trigger.

Have a question or a correction?

Contact the editorial team