Skip to content
WorksteadJournal

Considered choices.
Better places to work.

Printing & Scanning

Choosing Paper Trays for Letter, Legal, and Specialty Stock

This guide helps small workplace managers select, configure, and use paper trays for mixed stock types, reducing misprints, tray swaps, and team frustration with daily printing tasks.

A floorstanding office printer showing separate paper drawers, letter-size and longer blank sheets arranged beside the drawers
AI-generated editorial illustration.

An extra paper tray is useful when it removes a recurring stock change or refill that matters to the team. It is less useful when the printer cannot feed the intended material from that tray or users continue choosing the wrong stock. Evaluate the exact accessory, media limits, and selection behavior together.

Record stock changes as well as page volume

List the stocks used in a representative period: letter, legal, letterhead, envelopes, or other approved specialty media. Record how frequently each is needed, typical batch size, and whether switching stock interrupts another user. An occasional large job and frequent small jobs create different tray requirements.

Keep paper size separate from type and weight. Letter is 8.5 by 11 inches and legal is 8.5 by 14 inches, but two letter-size stocks may still need different media settings. Record gsm where available and preserve any relevant paper-category labeling rather than comparing ambiguous pound ratings.

Identify the cost of the current workaround. Count actual stock swaps, wrong-paper jobs, and time spent correcting them. Do not assume every swap causes a jam or that a new tray will eliminate every error.

Verify accessory and feed-path compatibility

Use the printer manufacturer’s supported accessory list for the exact model and configuration. Check any installation requirements, maximum number of trays, required base or stand, and changes to overall size and weight. Similar-looking trays are not necessarily interchangeable.

Read each tray’s supported sizes, media types, weights, and capacity conditions. An optional tray is not inherently fixed-size, and a bypass tray is not universally the only route for envelopes or heavy stock. The approved path depends on the device.

Confirm automatic duplex limits separately. Stock accepted from a tray for single-sided output may still be excluded from the duplex path. A tray purchase cannot remove a print engine or finishing limitation.

Observed need Option to evaluate Compatibility question
Frequent changes between letter and legal Separate supported trays Does each tray support the assigned size and required mode?
Occasional special stock Approved bypass or other supported feed route What are its media and loading limits?
Repeated refills of one stock Larger supported capacity Does usable capacity fit the actual stock?
Letterhead mixed with plain paper Separate stock assignment and saved settings Can the driver reliably select the intended type?

Understand capacity and the space it requires

A tray’s sheet capacity is specified under stated conditions. Thicker media may reach the load limit with fewer sheets, so use the marked limits and manual rather than forcing the advertised count into every stack. Keep paper guides positioned according to the loading instructions.

Measure the printer with the proposed tray installed, extended paper support, and access doors open. Legal-size paper may require an extended tray or other arrangement that changes the footprint. Confirm that supporting furniture remains suitable for the complete configuration.

Ask who installs the accessory and how the printer and driver recognize it. Some setups require configuration changes before software can select a new tray. Include that work in the quote instead of assuming mechanical attachment completes the installation.

Check automatic selection and substitution

Set the paper size and type consistently at the device and in the supported print workflow. Where a named stock profile is available, use it to distinguish plain paper from letterhead of the same size. Keep the physical tray label aligned with the actual contents.

Test what happens when a requested tray is empty. The printer may stop, prompt, or substitute another suitable tray depending on its configuration. If substitution would waste expensive stock or print on the wrong stationery, configure the supported behavior accordingly and explain it to users.

Check orientation with a small, clearly marked sample, following the device’s instructions for face direction and leading edge. Do not apply a universal rule for envelope flaps or letterhead orientation across printers and duplex modes.

Use an illustrative tray-planning calculation

Assume an imaginary office records 1,200 letter sheets and 350 legal sheets across ten working days. That is an average of 120 letter sheets and 35 legal sheets per working day. These figures are illustrative assumptions, not typical office use.

If a supported tray has an assumed usable capacity of 250 sheets for the selected paper, the period’s letter output requires at least five loads in total, including the initial load. Legal output requires at least two. Actual refill timing depends on batch sizes and when staff top up; averages do not create a fixed schedule.

A separate legal tray could remove stock changes, but the team should compare that benefit with the accessory cost, space, and configuration effort. If legal printing happens in one planned batch, an approved temporary stock change may remain practical. If it arrives throughout the day, a dedicated assignment may offer more convenience.

Accept the setup with real jobs and clear ownership

Run one representative job for each assigned stock from the applications users actually use. Include automatic duplex where supported, empty-tray behavior, and any permitted mixed-stock document. Check that the purchased configuration matches what was tested.

Keep unused paper under its supplier’s storage guidance. Do not invent a universal rule that letterhead can remain loaded for only a day or that all preprinted stock transfers ink under stack pressure. Follow actual media and device instructions and respond to observed problems.

Assign someone to update tray labels and shared settings when stock changes. If users temporarily load a different material, require a clear restoration step so the next job does not inherit an unexpected setup.

  • Log stock changes, batch sizes, and observed errors.
  • Verify exact accessory, media, and duplex compatibility.
  • Measure the expanded device and check support requirements.
  • Test tray selection, orientation, and empty-tray behavior.
  • Keep labels, driver settings, and contents consistent.
  • Review whether the extra tray actually removes the intended interruption.

Have a question or a correction?

Contact the editorial team